Dell G2210 User Manual

Also see for G2210: Technical guidebook Setup guide Specification sheet User guide

Contents

Back Press to go back to the main menu.Horizontal Position Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).NOTE: When using a DVI source, the Horizontal Position setting is not available.Vertical Position Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).NOTE: When using a DVI source, the Vertical Position setting is not available.Sharpness This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100'.Pixel Clock The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.Use the and buttons to adjust for best image quality.Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.DynamicContrastThe Dynamic Contrast adjustment helps the user to get a higher contrast if you choose Game preset, Movie Preset, Sports Preset and Nature Preset.(Brightness control is disabled while in Dynamic Contrast mode and will be grayed out.)Use the button to enable the Dynamic Contrast adjustment.Use the button to disable the Dynamic Contrast adjustment.NOTE: Dynamic Contrast is not available (greyed out) in Energy Smart Plus and Energy Smart modes.Display Reset Reset the image to the original factory setting.Exit Menu Press to exit the OSD main menu.OTHERSETTINGSDownloaded from ManualMonitor.com Manuals