Dell IN2020 User Manual

Also see for IN2020: Setup guide User guide

Contents

Dell IN2020 User Manual Manual pdf 26 page image

Great user manuals database on UserManuals.infoBack to Contents PageSetting Up the MonitorDell™ IN2020/IN2020M monitor User's GuideAttaching the BaseConnecting the MonitorAttaching the Soundbar (Optional)Removing the Monitor StandAttaching the BaseAfter placing the monitor panel on a soft cloth or cushion, complete the following steps to attach the base.1. Fit the groove on the back of the monitor to the two tabs on the upper part of the stand.2. Lower the monitor so that the monitor mounting area snaps on to or locks on to the stand.Connecting the MonitorTo connect your monitor to the computer perform the following steps/instructions:1. Turn off your computer and disconnect the power cable.2. Connect the white (digital DVI-D), or blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do notuse all the cables on the same computer. Use all of the cables only when they are connected to different computers with appropriate video systems.Connecting the blue VGA cableConnecting the White DVI Cable* (for IN2020M only)NOTE: The stand is detached when the monitor is shipped from the factory.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions.