Dell Inspiron 1100 Service Manual

Also see for Dimension 5100: Setup guide System information guide Setup User manual Owner's manual

Dell Inspiron 1100 Service Manual Manual pdf 36 page image

Installing the Memory Modules1. Align the notch in the module edge connector with the tab in the connector slot.2. Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove themodule and reinstall it.3. Replace the cover and tighten the captive screw.4. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.5. Turn on the computer.As the computer boots, it detects the additional memory and automatically updates the system configuration information.To confirm the amount of memory installed in the computer, click the Start button, click Help and Support, and then click Computer Information.CD or DVD DriveRemoving the CD or DVD Drive1. Follow the instructions in "Preparing to Work Inside the Computer."2. Turn the computer over, and remove the M2.5 x 8-mm screw labeled "O" next to the memory module cover.3. Loosen the captive screw (labeled "circle M") in the memory module cover, and lift the cover away from the computer.1 memory module2 securing clipsNOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.NOTICE: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.CAUTION: Before working inside your Dell™ computer, read the safety instructions in your Owner's Manual.CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any ofyour computer's electronic components. You can do so by touching an unpainted metal surface.