Solid white – Power adapter is connected and the battery has more than 5 percentcharge.Amber – Computer is running on battery and the battery has less than 5 percentcharge.Off• Power adapter is connected and the battery is fully charged.• Computer is running on battery and the battery has more than 5 percent charge.• Computer is in sleep state, hibernation, or turned off.The power and battery-status light blinks amber along with beep codes indicatingfailures.For example, the power and battery-status light blinks amber two times followed by apause, and then blinks white three times followed by a pause. This 2,3 patterncontinues until the computer is turned off indicating no memory or RAM is detected.The following table shows different light patterns, what they indicate, and thesuggested solutions.Table 14. System diagnostic lightsLight pattern Problem description Suggested solution2,1 CPU failure Replace the system board.2,2 System board: BIOS andROM failureFlash latest BIOS version. Ifproblem persists, replace thesystem board.2,3 No memory or RAMdetectedConfirm that the memory moduleis installed properly. If problempersists, replace the memorymodule.2,4 Memory or RAM failure Replace the memory module.2,5 Invalid memory installed Replace the memory module.2,6 System board or chipseterrorReplace the system board.2,7 LCD failure Replace the LCD.3,1 CMOS battery failure Replace the CMOS battery.3,2 PCI or video card or chipfailureReplace the CMOS battery.113
