Dell Inspiron 1318 Service Manual

Also see for Inspiron 1318: User guide Setup guide

Back to Contents PageDisplayDell™ Inspiron™ 1318 Service ManualRemoving the Display AssemblyReplacing the Display AssemblyRemoving the Display BezelReplacing the Display BezelRemoving the Display PanelReplacing the Display PanelRemoving the Display Panel CableReplacing the Display Panel CableRemoving the Display Assembly1. Follow the instructions in "Before You Begin" on page 9.2. Remove the memory module(s) (see Memory Module).3. Remove the WLAN card (see WLAN Card).4. Make note of the cable routing and carefully remove the antenna cables from their routing guides. Pull the cables with their connectors through thesystem board so that they are clear of the computer base.5. Remove the two M2.5 x 5-mm screws from the computer base.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions shipped with your computer.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (suchas a connector on the back of the computer).NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside thecomputer.