Changing the Boot Sequence for the Current Boot 149Changing the Boot Sequence for theCurrent BootYou can use the Boot Device Menu to boot your computer from adevice other than the default boot device. Your computer boots fromthe selected boot device only for the current boot, and boots from thedefault device on the next reboot. To boot using the Boot Device Menu:1. If booting from the optical drive, insert the bootable media into thedrive.If booting from a USB device, connect the USB device to yourcomputer.If booting from a network, connect the network cable to yourcomputer.2. Turn on (or restart) your computer.3. Press when F2 = Setup, F12 = Boot Menu appears on thescreen.NOTE: If you wait too long and the operating system logo appears,continue to wait until you see the Microsoft Windows desktop.Then shut down your computer and try again.4. The Boot Device Menu appears.5. Select the device you want to boot from by pressing up-arrow/down-arrow key or by pressing the number displayed next to theboot device.For example, if you are booting from a USB memory key, highlightUSB Flash Device and press .NOTE: The device you are trying to boot from must be bootable. Toensure your media is bootable, check the device documentation.