DC-in Cable 7918DC-in CableWARNING: Before working inside your computer, read the safety informationthat shipped with your computer. For additional safety best practices information,see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on yourcomputer. Damage due to servicing that is not authorized by Dell is not covered byyour warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wristgrounding strap or by periodically touching an unpainted metal surface (such as aconnector on your computer).CAUTION: To help prevent damage to the system board, remove the main battery(see "Removing the Battery" on page 13) before working inside the computer.Removing the DC-in Cable1 Follow the instructions in "Before You Begin" on page 9.2 Remove the battery. See "Removing the Battery" on page 13.3 Remove the module cover. See "Removing the Module Cover" on page 15.4 Remove the keyboard. See "Removing the Keyboard" on page 25.5 Remove the palm-rest assembly. See "Removing the Palm-Rest Assembly"on page 29.6 Remove the display assembly. See "Removing the Display Assembly" onpage 42.7 Remove the screw that secures the DC-in assembly to the computer base.