Camera Module 6315Camera ModuleWARNING: Before working inside your computer, read the safety informationthat shipped with your computer. For additional safety best practices information,see the Regulatory Compliance Homepage atwww.dell.com/regulatory_compliance.CAUTION: To avoid electrostatic discharge, ground yourself by using a wristgrounding strap or by periodically touching an unpainted metal surface (such as aconnector on your computer).CAUTION: Only a certified service technician should perform repairs on yourcomputer. Damage due to servicing that is not authorized by Dell™ is not coveredby your warranty.CAUTION: To help prevent damage to the system board, remove the main battery(see "Removing the Battery" on page 13) before working inside the computer.Removing the Camera Module1 Follow the procedures in "Before You Begin" on page 9.2 Remove the battery (see "Removing the Battery" on page 13).3 Remove the hinge cover (see "Removing the Hinge Cover" on page 15).4 Remove the keyboard (see "Removing the Keyboard" on page 17).5 Remove the display assembly (see "Removing the Display Assembly" onpage 47).6 Remove the display bezel (see "Removing the Display Bezel" on page 51).7 Remove the inverter board (see "Removing the Inverter Board" onpage 59).8 Remove the display panel (see "Removing the Display Panel" on page 53).9 Remove the two screws that secure the camera module to the displaycover.10 Slide the camera module towards the right to release it from the displaycover.