Steps1. Remove the six screws (M2x5) that secure the base cover to the palmrest and keyboard assembly.2. Loosen the two captive screws.3. Using a plastic scribe, pry open the base cover from the recesses located in the U-shaped indents at the top edge of thebase cover near the hinges.4. Lift and slide the base cover off the palmrest and keyboard assembly.5. Disconnect the battery cable from the system board.6. Press and hold the power button for five seconds to ground the computer and drain the flea power.16 Removing and installing components

Dell Inspiron 15 3515 Series Service Manual