Replacing the Camera Module | 67Replacing the Camera ModuleWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 7. After working inside your computer, follow the instructions in "AfterWorking Inside Your Computer" on page 9. For additional safety bestpractices information, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.Procedure1 Align the camera module on the display back-cover.2 Replace the screw that secures the camera module to the display back-cover.3 Adhere the tape that secures the camera module to the display back-cover.4 Connect the camera cable to the connector on the camera module.Postrequisites1 Replace the display bezel. See "Replacing the Display Bezel" on page 57.2 Replace the display assembly. See "Replacing the Display Assembly" on page 54.3 Replace the palm-rest. See "Replacing the Palm-Rest" on page 27.4 Replace the keyboard. See "Replacing the Keyboard" on page 23.5 Replace the optical-drive assembly. See "Replacing the Optical-Drive Assembly" onpage 17.6 Replace the hard-drive assembly. See "Replacing the Hard-Drive Assembly" onpage 20.7 Follow the instructions from step 3 and step 4 in "Replacing the Memory Module(s)"on page 14.8 Replace the battery. See "Replacing the Battery" on page 11.