Display Assembly | 37Replacing the Display AssemblyProcedure1 Place the display assembly in position and replace the screws that secure thedisplay assembly to the computer base.2 Route the display cable through the routing guides and connect the display cableto the connector on the system board.3 Adhere the tape that secures the display cable to the system board.4 Connect the antenna cables to the connectors on the Mini-Card.Postrequisites1 Replace the palm rest. See "Replacing the Palm Rest" on page 31.2 Replace the base cover. See "Replacing the Base Cover" on page 18.3 Replace the keyboard. See "Replacing the Keyboard" on page 16.4 Replace the battery. See "Replacing the Battery" on page 13.5 Follow the instructions in "After Working Inside Your Computer" on page 9.Removing the Display BezelPrerequisites1 Remove the battery. See "Removing the Battery" on page 13.2 Remove the keyboard. See "Removing the Keyboard" on page 15.3 Remove the base cover. See "Removing the Base Cover" on page 17.4 Remove the palm rest. See "Removing the Palm Rest" on page 27.5 Remove the display assembly. See "Removing the Display Assembly" on page 35.