Dell Inspiron 20 Service Manual

Also see for Inspiron 20: Owner's manual Manual Quick start guide Quick start guide Quick start guide

Contents

Replacing the DisplayAssemblyWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps inBefore Working Inside Your Computer. After working inside yourcomputer, follow the instructions in After Working Inside YourComputer. For more safety best practices, see the RegulatoryCompliance home page at dell.com/regulatory_compliance.Procedure1 Place the display panel on a flat and clean surface.2 Align the screw holes on the display-panel brackets with the screw holeson the display panel.3 Replace the screws that secure display-panel brackets to the displaypanel.4 Align the screw holes on the display-panel brackets with the screw holeson the display bezel and adhere the display panel to the display bezel.NOTE: Make sure that no cables are under the display panel.5 Replace the screws that secure the display-panel brackets to the displaybezel.6 Connect the display cable and secure the cable with the tapes.7 Connect the display-backlight cable to the display panel.8 Adhere the Aluminium foil tapes to the antenna modules.9 Adhere the Aluminium foil tape to the antenna cable.10 Adhere the Aluminium foil tape to the antenna cable and camera andcontrol-buttons board cable.Post-requisites1 Follow the instructions from step 8 to step 13 in “Replacing the SystemBoard”.2 Replace the speakers.3 Follow the instructions from step 3 to step 5 in “Replacing the BackCover”.58