Dell Inspiron 2100 Manual
Also see for Inspiron 2100: Installation instructionsStart hereSetup and features informationService manualUser guide
                                                                                                          | |
Contents
|
Removing and Replacing Parts : Dell Inspiron 2100the release button assembly.7. To remove the battery release latch, unhook the small tension spring located on themetal post next to the hard drive.APR Docking DoorsNOTICE: Disconnect the computer and any attached devices from electrical outlets, andremove any installed batteries.NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touchingan unpainted metal surface on the computer.NOTICE: Read "Preparing to Work Inside Your Computer" before performing thefollowing procedure.Removing the APR Docking Doors1. Turn the computer upside down.The APR docking doors should be at the top.2. Carefully insert a small flat-blade screwdriver in the opening between the door edges andthe edge of the door opening on the right side.There is a small slot at the right edge of the door opening to show where the screwdriveris placed.3. Gently push the screwdriver against the right edge of the back door to cause the door tobow up at the center.4. Grasp the back door as it bows up while still pressing the door edge with the screwdriver.5. Carefully slip the right-edge hinge of the back door off its right hinge pin.NOTICE: The doors are attached to each other by a tension spring at the left end of thedoors. Do not try to separate the doors from each other. They must be removedtogether.6. Gently push the screwdriver against the right edge of the front door to cause the door tobow up at the center.file:///F|/Service%20Manuals/Dell/Inspiron/2100/remove.htm (43 of 44) [2/28/2004 6:49:35 AM] |
Related manuals for Dell Inspiron 2100
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine