Replacing the Display PanelWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps inBefore Working Inside Your Computer. After working inside yourcomputer, follow the instructions in After Working Inside YourComputer. For more safety best practices, see the RegulatoryCompliance home page at dell.com/regulatory_compliance.Procedure1 Place the display panel on a flat and clean surface.2 Align the screw holes on the display-panel side-brackets with the screwholes on the display panel.3 Replace the screws that secure display-panel side-brackets to the displaypanel.4 Align the screw holes on the display-panel side-brackets with the screwholes on the display bezel and place the display panel to the displaybezel.NOTE: Make sure that no cables are under the display panel.5 Slide the flex cables into the connectors on the display panel and pressdown on the connector latches to secure the cables.6 Replace the screws that secure the display panel to the display bezel.7 Replace the screws that secure the display-panel bracket to the displaybezel.Post-requisites1 Replace the power-button module.2 Replace the stand assembly.3 Replace the microphones.4 Replace the camera.5 Replace the back cover.6 Replace the computer base.7 Replace the base cover.88