Dell Inspiron 24 5000 All-in-One Service Manual

Also see for Inspiron 24 5000 Series: Service manual Quick start guide Quick start guide Quick start guide Quick start guide

Contents

Dell Inspiron 24 5000 All-in-One Service Manual Manual pdf 48 page image

Replacing the side I/O-boardWARNING: Before working inside your computer, read the safety information that shipped with your computer and follow thesteps in Before working inside your computer. After working inside your computer, follow the instructions in After working insideyour computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Procedure1 Align and place the side-I/O board onto the display-assembly base.2 Replace the two screws (M2.5x3.5) that secure the side-I/O board to the display-assembly base.3 Route the headset-port cable through the routing guide on the side-I/O board.4 Connect the side-I/O power cable to the side-I/O board.5 Connect the side-I/O cable to the side-I/O board.6 Align the screw holes on the side-I/O board shield to the screw holes on the display-assembly base.7 Replace the two screws (M3x5) that secure the side-I/O board shield to the display-assembly base.8 Route the side-I/O cable, side-I/O power cable, and headset-port cable through the routing guides on the display-assembly base.9 Connect the headset-port cable to the system board.10 Connect the side-I/O power cable to the system board.11 Connect the side-I/O cable to the system board.2748 Replacing the side I/O-board