Dell Inspiron 2500 Factory Service Manual

Also see for Inspiron 2500: Start here Start here Solution guide Factory Service manual

Contents

Removing and Replacing Parts : Dell Inspiron 2500 SystemsMedia Bay DevicesNOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove anyinstalled battery.NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching anunpainted metal surface on the computer.Removing Media Bay Devices1. Follow the instructions in "Preparing to Work Inside the Computer."2. Close the display, turn the computer upside down on a flat work surface, and remove the battery.3. Remove the device from the media bay.4. Push the module latch toward the right side of the computer. Keep holding the latch open while pulling thedevice out of the media bay with the other hand.Memory ModulesNOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installedbattery.NOTICE: To avoid possible damage to the memory module from ESD, ground yourself by using a wristgrounding strap or by periodically touching an unpainted metal surface on the computer.Removing the Memory Module CoverNOTICE: To avoid damaging the system board, you must remove the battery before you service thecomputer.NOTICE: Handle memory modules with care. Don't touch the components on a module. Hold a module byits edges.1. Follow the instructions in "Preparing to Work Inside the Computer."2. Remove the screw.3. Disengage the metal tabs at the opposite end of the cover.file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...hecked%20ok/Inspiron/2500/2500%20SM/remove.htm (8 of 46)6/21/2004 12:45:37 AM