Replacing the Display Panel | 87Replacing the Display PanelWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 7. After working inside your computer, follow the instructions in "AfterWorking Inside Your Computer" on page 9. For additional safety best practicesinformation, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.Procedure1 Connect the display cable to the connector on the display panel.2 Adhere the tape that secures the display cable.3 Gently place the display panel on the display back cover.4 Align the screw holes on the display panel with the screw holes onthe display back-cover.5 Replace the screws that secure the display panel to the display back-cover.Postrequisites1 Replace the display hinges. See "Replacing the Display Hinges" on page 81.2 Replace the display bezel. See "Replacing the Display Bezel" on page 77.3 Replace the display assembly. See "Replacing the Display Assembly" on page 73.4 Replace the palm-rest. See "Replacing the Palm-Rest" on page 35.5 Replace the keyboard. See "Replacing the Keyboard" on page 29.6 Replace the optical-drive assembly. See "Replacing the Optical-Drive Assembly" onpage 21.7 Replace the hard-drive assembly. See "Replacing the Hard-Drive Assembly" onpage 25.8 Follow the instructions from step 3 and step 4 in "Replacing the Memory Module(s)"on page 17.9 Replace the battery. See "Replacing the Battery" on page 13.10 Follow the instructions in "After Working Inside Your Computer" on page 9.