Display Assembly and Display Latch: Dell Inspiron 510m Service ManualDisplay Panel14.1-Inch Display PanelCAUTION: Before performing the following procedures, read the safety instructionsin your Owner's Manual.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap orby touching an unpainted metal surface on the computer.1. Follow the instructions in "Preparing to Work Inside the Computer."2. Remove the keyboard.3. Remove the display bezel.4. Remove the eight M2 x 5-mm screws from each side of the display- panel adapter rails.5. Lift the display panel, and rotate the display panel out of the display cover.6. Remove the four M2 x 3-mm screws from each side of the display panel to remove the adapterrails.When reinstalling the adapter rails to the replacement display panel, orient the rails so that the"This side up" markings are facing you, and then reattach the rails with the M2 x 3-mm fourscrews. (The "This side down" markings on the rails should be visible from the backside of thedisplay panel.)file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ecked%20ok/Inspiron/510M/510M%20SM/display.htm (7 of 12)6/21/2004 12:34:56 AM