Dell Inspiron 518 Service Manual

Also see for Inspiron 518: User guide Quick reference guide Service manual Guía de referencia rápida

Replace the card retention bracket ensuring that:l The guide clamp is aligned with the guide notch.l The tops of all cards and filler brackets are flush with the alignment bar.l The notch in the top of the card or filler bracket fits around the alignment guide.Configuring Your Computer After Removing or Installing a PCI/PCI Express CardBack to Contents Page1 alignment guide 2 filler bracket3 alignment bar 4 card retention bracket5 guide clamp (2) 6 guide notch (2)NOTE: For information on location of connectors, see the Quick Reference Guide. For information on installing drivers and software for your card, see thedocumentation that shipped with the card.Installed RemovedSoundCard1. Enter system setup (seeSystem Setup)2. Go to IntegratedPeripherals and selectOnboard AudioController, and thenchange the setting toDisabled.3. Connect the externalaudio devices to thesound card's connectors.1. Enter system setup (seeSystem Setup)2. Go to IntegratedPeripherals and selectOnboard AudioController, and thenchange the setting toEnabled.3. Connect the externalaudio devices to thecomputer's back panelconnectors.NetworkCard1. Enter system setup (seeSystem Setup)2. Go to IntegratedPeripherals and selectOnboard LAN Controller,and then change thesetting to Disabled.3. Connect the networkcable to the networkcard's connector.1. Enter system setup (seeSystem Setup)2. Go to IntegratedPeripherals and selectOnboard LAN Controller,and then change thesetting to Enabled.3. Connect the networkcable to the integratednetwork connector.