Dell Inspiron 560s Service Manual

Also see for Inspiron 560s: Setup guide Specifications

Back to Contents PageSupport BracketDell™ Inspiron™ 560s Service ManualRemoving the Support BracketReplacing the Support BracketRemoving the Support Bracket1. Follow the procedures in Before You Begin.2. Remove the computer cover (see Removing the Computer Cover).3. Pull back the support-bracket release latch and pivot the support bracket up.4. Lift the support bracket off the hinge-tab slots and set it aside in a secure place.Replacing the Support Bracket1. Follow the procedures in Before You Begin.2. Align and insert the hinge tabs at the bottom of the support bracket into the hinge-tab slots located along the edge of the computer.3. Pull back the support-bracket release latch and pivot the support bracket downward, until the support-bracket release latch locks into place.WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)removed.1 support-bracket release latch 2 hinge-tab slots (2)3 hinge tabs (2) 4 support bracket