Dell Inspiron 620 Service Manual

Also see for Inspiron 620: Setup guide Upgrade manual System information guide Quick start Quick reference guide

Asset Tag Displays the asset tag of the computer when the asset tag is presentProcessor InformationProcessor Type Displays the processor typeL2 Cache Displays the L2 cache sizeL3 Cache Displays the L3 cache sizeMemory InformationMemory Installed Indicates the amount of memory installed in MBMemory Speed Indicates the memory speed in MHzMemory Technology Indicates the type of installed memoryMemory Channel Indicates single channel or dual channel modeDevice InformationSATA 0 Displays the SATA drive connected to the SATA 0 connectorSATA 1 Displays the SATA drive connected to the SATA 1 connectorSATA 2 Displays the SATA drive connected to the SATA 2 connectorSATA 3 Displays the SATA drive connected to the SATA 3 connectorAdvancedCPU Configuration l Hyper-threading — Enabled or Disabled (Enabled by default)l Active Processor Cores — All; 1; 2; 3 (All by default)l Limit CPUID Value — Enabled or Disabled (Disabled by default)l CPU XD Support — Enabled or Disabled (Enabled by default)l Intel Virtualization Technology — Enabled or Disabled (Enabled by default)l Intel SpeedStep — Enabled or Disabled (Enabled by default)l Intel Turbo Boost Technology — Enabled or Disabled (Enabled by default)l CPU C6 Report — Enabled or Disabled (Enabled by default)GraphicsConfigurationl Intel Multiple Monitor Feature — Enabled or Disabled (Disabled by default)System Configuration l Onboard Audio Controller — Enabled or Disabled (Enabled by default)l Onboard LAN Controller — Enabled or Disabled (Enabled by default)l Onboard LAN Boot ROM — Enabled or Disabled (Disabled by default)l SATA Mode — AHCI; RAID (AHCI by default)l USB Controller — Enabled or Disabled (Enabled by default)l USB Storage Boot Function — Enabled or Disabled (Enabled by default)l Onboard Card Reader — Enabled or Disabled (Enabled by default)l Onboard Serial Port — Enabled or Disabled (Enabled by default)l Serial Port IO Address/IRQ — 3F8h/IRQ4; 2F8h/IRQ3; 3E8h/IRQ4; 2E8h/IRQ3 (3F8h/IRQ4 by default)Power Management l USB Powershare in Sleep State — Normal; Enhanced (Normal by default)l Resume by PS/2 Devices — Enabled or Disabled (Enabled by default)l Auto Power On — Enabled or Disabled (Disabled by default)l Auto Power On Date — 0 to 31, 0 for everyday (15 by default)l Auto Power On Hour — 0 to 23 (12 by default)l Auto Power On Minute — 0 to 59 (30 by default)l Auto Power On Second — 0 to 59 (30 by default)Post Behavior l Bootup NumLock State — On; Off (On by default)l Keyboard Error Report — Enabled; Disabled (Enabled by default)SecurityUnlock Setup Status Displays the setup statusAdmin PasswordStatusDisplays the admin password statusSystem PasswordStatusDisplays the system password statusAdmin Password Allows to set, change, or delete the administrator passwordNOTE: Deleting the administrator password will delete the system password. Hence, the administrator password must be set beforesetting the system password.System Password Allows to set, change, or delete the system passwordBoot Menu Security Enabled or DisabledUser must enter Admin Password to access the F12 Boot Menu when this setting is enabled (Disabled by default)HDD ProtectionFeatureEnabled or Disabled (Disabled by default)Boot1st Boot Priority Specifies the boot sequence from the available devices