Dell Inspiron 6400 Service Manual

Also see for 6400 - Inspiron Laptop: Owner's manual

Display PanelRemoving the Display Panel1. Follow the instructions in Before Working Inside Your Computer.2. Remove the display assembly (see Removing the Display Assembly).3. Remove the display bezel (see Removing the Display Bezel).4. Remove the eight M2 x 3-mm screws (four on each side of the display panel).5. Lift the display panel out of the display back cover.6. Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector.7. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.NOTICE: To help prevent damage to the system board, you must remove the main battery (see Before Working Inside Your Computer) before youbegin working inside the computer.1 display panel 2 M2 x 3-mm screws (8) 3 display back cover4 grounding wire and captive screw1 pull-tab on bottom flex-cableconnector2 top flex-cableconnector3 display cableconnector