34 Using CDs, DVDs, and Other Multimediaw w w . d e l l . c o m | s u p p o r t . d e l l . c o m 5 Plug the two RCA connectors on the other end of the audio cable in to the audio inputconnectors on your TV or other audio device.6 Turn on the TV, turn on any audio device that you connected (if applicable), and then turn onthe computer.7 See "Enabling the Display Settings for a TV" on page 34 to ensure that the computerrecognizes and works properly with the TV.Enabling the Display Settings for a TVIntegrated Video ControllerNOTE: Ensure that you properly connect the TV before you enable the display settings.1 Click the Start button and click Control Panel.2 Click Appearances and Themes.3 Under or pick a Control Panel icon, click Display.4 Click the Settings tab and click Advanced.5 Click the Intel (R) Extreme Graphics tab.6 Click Graphic Properties.7 If you want to use only a TV without using the computer display or any other display options:a In the new window, click TV so that a red check mark appears directly on top of the TV icon.b Ensure that the settings are correct.8 If you want to use a TV and the computer display at the same time:a In the new window, click Intel (R) Dual Display Clone and ensure that one of thedevices listed is a TV.b Click Device Settings.c In the new window, ensure that the display resolution settings are correct.9 Click Apply to view the new settings.10 Click OK to confirm the settings change.11 Click Yes to keep the new settings.12 Click OK.
