Dell Inspiron 700m Service Manual

Also see for Inspiron 600m: Setup guide User guide Setup guide Start here Start here

Dell Inspiron 700m Service Manual Manual pdf 13 page image

Back to Contents PageCooling FanDell™ Inspiron™ 700m Service ManualRemoving the Cooling FanRemoving the Cooling Fan1. Remove the battery.2. Remove the keyboard.3. Disconnect the black and white antenna cables from the Mini PCI Card.4. Remove the display module.5. Remove the palm rest.6. Remove the system board.7. Remove the three M2 x 3-mm screws that secure the cooling fan to the system board.8. Remove the tape that secures the cooling fan cable to the fan.9. Disconnect the cooling fan cable from the system board connector.10. Lift the cooling fan up and out of the bottom case.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.NOTICE: Disconnect the computer and any attached devices from electrical outlets.NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.NOTICE: Read "Before Working Inside Your Computer" before performing the following procedure.1 system board connector2 cooling fan connector3 cooling fan4 M2 x 3-mm screws (3)NOTICE: Do not pull on the cooling fan cable. Pull from the cooling fan connector to disconnect the cable.