support.dell.com Operating System Setup 2-34. Click I accept this agreement. Click Next.The Personalize Your Software window appears.Type your name and the name of your organization. You must type in a name, butthe organization field is optional.5. Click Next.The Computer Name and Administrator Password window appears. A sug-gested name for your computer appears in the name box that you can change oraccept. Leaving the password field empty is acceptable if you prefer not to use apassword. Although the administrator password is optional, it is useful forprotecting against unauthorized access to operating system settings. You mayadd a password of up to 14 characters in length. You may add or change apassword later.NOTICE: Type the password carefully. It is case-sensitive, and if youlose or forget it, you must reinstall the operating system to accessWindows 2000 Professional.More information on administrator and user logins is available from the Windows2000 Help feature.6. Click Next.The Date and Time Settings window appears.7. Verify that the settings are correct for your time and time zone and click Next.The Networking Settings window appears. You may choose whether to use typ-ical or custom settings. See your network administrator if you need to addcustom settings at this point.8. Click Next to accept the default typical settings.The Workgroup or Computer Domain window appears. You may add a work-group name, but it is not required. Check with your network administrator if youneed to add a computer domain.9. Click Next to continue.The Performing Final Tasks window appears. Then the following messageappears:You have successfully completed Windows 2000 Setup. Ifthere is a CD in your drive, remove it. Then, to restartyour computer, click Finish.10. Click Finish and your system restarts.The Welcome to the Network Identification Wizard window appears.11. Click Next.The Users of This Computer window appears.1945t3c2.fm Page 3 Thursday, August 10, 2000 2:36 PM