Dell Inspiron 7501 Service Manual

Also see for Inspiron 7501: Quick start Setup and specifications Setup and specifications

Steps1. Remove two screws (M2.5x5) and (M2.5x4), and lift the right display hinge.2. Peel the tape that secures the display cable to the system board.3. Open the latch, and disconnect the display cable from the system board.4. Remove and lift the USB Type-C port off the system board.5. Open the latch, and disconnect the I/O cable from the system board.6. Disconnect the speaker cable from the system board.7. Open the latch, and disconnect the touchpad cable from the system board.8. Open the latch, and disconnect the keyboard-backlight cable from the system board.9. Remove the two screws (M2x3) that secure the USB Type-C port bracket to the system board.10. Lift the USB Type-C port bracket.11. Remove the two screws (M2x3) that secure the system board to the palm-rest and keyboard assembly.12. Gently release the ports on the system board from the slots on the palm-rest and keyboard assembly and lift the system board off thepalm-rest and keyboard assembly.Installing the system boardPrerequisitesIf you are replacing a component, remove the existing component before performing the installation procedure.Removing and installing components 57