Replacing the Wireless Card | 33Replacing the Wireless CardWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before Working InsideYour Computer" on page 7. After working inside your computer, follow theinstructions in "After Working Inside Your Computer" on page 9. For moresafety best practices, see the Regulatory Compliance home page atdell.com/regulatory_compliance.ProcedureCAUTION: To avoid damage to the wireless mini-card, make sure that no cablesare placed under the wireless mini-card.1 Align the notch on the wireless card with the tab on the mini-card connector.2 Insert the wireless card at an angle into the mini-card connector.3 Press the other end of the wireless card down to secure it in the tab.4 Connect the antenna cables to the wireless card.The following table provides the antenna cable color schemes for the wireless cardsupported by your computer.Postrequisites1 Replace the base cover. See "Replacing the Base Cover" on page 29.2 Replace the keyboard. See "Replacing the Keyboard" on page 26.3 Replace the hard-drive assembly. See "Replacing the Hard Drive" on page 21.4 Replace the optical-drive assembly. See "Replacing the Optical Drive" on page 18.5 Replace the battery. See "Replacing the Battery" on page 12.Connectors on the wireless mini-card Antenna-cable colorMain (white triangle)Auxiliary (black triangle)WhiteBlack