Wireless Mini-Card 59Replacing the Wireless Mini-CardProcedure1 Align the notch on the Mini-Card with the tab on thesystem-board connector.CAUTION: Use firm and even pressure to slide the Mini-Card into place. If youuse excessive force, you may damage the connector.CAUTION: The connectors are keyed to ensure correct insertion. If you feelresistance, check the connectors on the Mini-Card and on the system board,and realign the Mini-Card.CAUTION: To avoid damage to the Mini-Card, never place cables underthe Mini-Card.2 Insert the Mini-Card connector at a 45-degree angle into thesystem-board connector.3 Press the other end of the Mini-Card down into the slot on thesystem board and replace the screws that secure the Mini-Card tothe system-board connector.4 Connect the antenna cables to the connectors on the Mini-Card.The following table provides the antenna cable color scheme for theMini-Card supported by your computer.Postrequisites1 Replace the system-board shield.See "Replacing the System-Board Shield" on page 51.2 Replace the VESA-mount bracket.See "Replacing the VESA-Mount Bracket" on page 44.Connectors on the Mini-Card Antenna Cable Color SchemeWLAN + Bluetooth (2 cables)Main WLAN + Bluetooth (white triangle)Auxiliary WLAN + Bluetooth (black triangle)whiteblack
