Dell Inspiron X200 Service Manual

Also see for Inspiron X200: User manual User guide User guide Information guide Information guide

Back to Contents PageHinge Covers and Display AssemblyDell™ X200 Service ManualHinge CoversDisplay AssemblyHinge CoversRemoving the Hinge Covers1. Remove the battery.2. On the inside of the battery bay, use your fingers to unhook the hinge covers from the back of the computer.3. Open the display 180 degrees.4. Push up on the hinge covers to remove them from the computer.Replacing the Hinge Covers1. Open the computer all the way (180 degrees) so that it lies flat against your work surface.2. Place the hinge covers over the display hinges:a. The left hinge cover fits over the power button and the right hinge cover fits over the Dell™ AccessDirect™ button. Both hinge covers passthrough the display hinges to the back of the computer.b. Ensure that the two securing tabs on the outer edge of each hinge cover are engaged in their respective slots.3. Press down on the top of each hinge cover to snap the hinge covers into place.4. Close the display.5. Press the back of each hinge cover into the back of the computer.Display AssemblyRemoving the Display Assembly1. Remove the battery.2. Remove the keyboard.3. Remove the two M2 x 6-mm screws by the display hinges on the top of the computer.1 hinge covers (2)NOTE: The back of each hinge cover has a tab that snaps into a slot on the back of the computer.NOTICE: Disconnect the computer and any attached devices from electrical outlets.NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.