Dell Inspiron XPS Gen 2 Service Manual

Also see for XPS /Dimension Gen 2: Owner's manual Service manual Owner's manual User guide Quick setup

Back to Contents PageSpeakersDell™ Inspiron™ XPS Service ManualRemoving the SpeakersReplacing the SpeakersRemoving the Speakers1. Follow the instructions in "Before Working Inside Your Computer."2. Remove the center control cover.3. Remove the keyboard.4. Remove the display assembly.5. Remove the palm rest.6. Disconnect the two speaker connectors from the system board connector.7. Lift the tape securing the speaker cable to the computer base.8. Remove the four M2.5 x 5-mm screws from the speakers (two on each speaker).9. Gently remove the speakers.Replacing the Speakers1. Connect the speaker connectors to the system board connectors.2. Gently align the speakers on the screw holes for securing the speakers to the computer base.3. Replace the four M2.5 x 5-mm screws to secure the speakers in place (two on each speaker).CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (suchas the back panel) on the computer.NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.NOTICE: Handle the speakers with care to avoid damaging them.1 M2.5 x 5-mm screws (4)2 speakers3 speaker LED connector4 speaker connector