PostScript menuMenu item DescriptionPrint PS ErrorOnOffPrints a page containing the PostScript errorNote: Off is the factory default setting.Font PriorityResidentFlash/DiskEstablishes the font search orderNotes:• Resident is the factory default setting.• A formatted flash memory option card must be installed in the printer andoperating properly for this menu item to be available.• The flash memory option cannot be Read/Write, Write, orpassword-protected.• Job Buffer Size must not be set to 100%.PCL Emul menuMenu item DescriptionFont SourceResidentDownloadFlashAllSpecifies the set of fonts availableNotes:• Resident is the factory default setting. It shows the factory default set offonts downloaded into RAM.• Download appears only if downloaded fonts exist. It shows all the fontsdownloaded into RAM.• Flash appears only if a flash option containing fonts is installed.• A flash option must be properly formatted and cannot be Read/Write,Write, or password protected.• All shows all fonts available to any option.Font NameLets you view or change the setting from a selection listSymbol SetLets you view or change the setting from a selection listPCL Emulation SettingsPoint Size1.00–1008.00Changes the point size for scalable typographic fontsNotes:• 12 is the factory default setting.• Point Size refers to the height of the characters in the font. One point equalsapproximately 1/72 of an inch.• Point sizes can be increased or decreased in 0.25-point increments.Understanding the printer menus30
