Dell Latitude 10 - ST2e Owner's Manual

Also see for Latitude 10 - ST2e: Setup & features Setup and features information

Keystroke Actionconnected to anoptional external USBkeyboard)On Screen MousePointerUse this to navigate the System Setup by using your finger or an interactive pen.Apply Icon Save current configuration.Defaults Icon Load setup defaults.Exit Icon Exits System Setup.Boot MenuPress when the Dell logo appears to initiate a one-time boot menu with a list of the valid boot devices for thesystem. Hard Drive Network Diagnostics and Enter Setup options are included in this menu. The devices listed on theboot menu depend on the bootable devices in the system. This menu is useful when you are attempting to boot to aparticular device or to bring up the diagnostics for the system. Using the boot menu does not make any changes to theboot order stored in the BIOS.System Setup (BIOS) OptionsTable 1. System InformationOption FunctionBIOS Version Displays the BIOS revision.Service Tag Displays the service tag of your tablet.Asset Tag Displays the asset tag of your computer.Ownership Tag Displays the ownership information.Manufacture Date Displays the date of manufacture.Ownership Date Displays the ownership date.Memory Installed Displays the memory installed on the computer.Memory Available Displays the memory available on the computer.Memory Speed Displays the memory speed.Table 2. Battery InformationOption FunctionAC Adapter Displays the AC Adapter information.Battery Status Displays the current battery status.Battery Charge State Displays if the battery is charging/discharging.Battery Health Displays the battery health.22