Back to Contents PageSpeakersDell™ Latitude™ 131L/Dell Vostro™ 1000 Service ManualRemoving the SpeakersReplacing the SpeakersRemoving the Speakers1. Follow the instructions in Before You Begin.2. Remove the hinge cover (see Removing the Hinge Cover).3. Remove the keyboard (see Removing the Keyboard).4. Remove the display assembly (see Removing the Display Assembly).5. Remove the palm rest (see Removing the Palm Rest).6. Disconnect the speaker cable connector from the system board.7. Remove the M2.5 x 5-mm screws from the speakers.8. Remove the speaker cable from the routing clips and remove the speakers.CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (suchas the back panel) on the computer.NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside thecomputer.NOTICE: Handle the speakers with care to help prevent damage to them.1 speakers (2) 2 speaker cable connector 3 M2.5 x 5-mm screws (2)