Back to Contents PageNo SODIMMs are installed2. If memory is already present, reseat the module(s) one attime in each slot.3. Try known good memory from another computer or replace thememory.4. Replace the system board.FLASH-ON-ONSystem board error1. Reseat the processor.2. Replace the system board.3. Replace the processor.FLASH-ON-FLASHLCD Panel Error1. Reseat the LCD cable.2. Replace the LCD panel.3. Replace the video card/system board.OFF-FLASH-OFFMemory compatibility error1. Install compatible memory modules.2. If two modules are installed, remove one and test. Try theother module in the same slot and test. Test the other slotwith both modules.3. Replace the memory.4. Replace the system board.ON-FLASH-ONMemory is detected but haserrors1. Reseat the memory.2. If two modules are installed remove one and test. Try theother module in the same slot and test. Test the other slotwith both modules.3. Replace the memory4. Replace the system board.OFF-FLASH-FLASHModem Error1. Reseat the modem.2. Replace the modem.3. Replace the system board.FLASH-FLASH-FLASHSystem board error 1. Replace the system board.FLASH-FLASH-OFFOption ROM Error1. Reseat the device.2. Replace the device.3. Replace the system board.OFF-ON-OFFStorage device error1. Reseat the hard drive and optical drive.2. Test the computer with just the hard drive and just the opticaldrive.3. Replace the device that is causing the failure.4. Replace the system board.FLASH-FLASH-ONVideo card error 1. Replace the system board.