Back to Contents PageSystem SetupDell Latitude 2110 Service ManualOverviewEntering System SetupBoot MenuNavigation KeystrokesSystem Setup Menu OptionsOverviewUse System Setup to:l Change the system configuration information after you add, change, or remove any hardware in your computerl Set or change a user-selectable option such as the user passwordl Read the current amount of memory or set the type of hard drive installedBefore you use System Setup, it is recommended that you write down the System Setup screen information for future reference.Entering System Setup1. Turn on (or restart) your computer.2. When the DELL logo is displayed, press immediately.Boot MenuThe Boot menu lists all the valid boot devices for your computer. Use the Boot menu to:l Run diagnostics on your computerl Enter system setupl Change the boot sequence without changing the boot sequence permanently in the system setup.To access the Boot menu:1. Turn on (or restart) your computer.2. When the blue DELL logo is displayed, press immediately.Navigation KeystrokesUse the following keystrokes to navigate System Setup screens.System Setup Menu OptionsThe following tables describe the menu options for the System Setup program.CAUTION: Unless you are an expert computer user, do not change the settings for this program. Certain changes can cause your computer to workincorrectly.NavigationAction Keystroke(s)Expand and collapse field , left- or right-arrow keyExit BIOS , Exit buttonSelect field to change Change a field Make the required change and click ApplyCancel modification Reset defaults Load Defaults buttonGeneralOption DescriptionThis section lists the primary hardware features of your computer. There are no configurable options in this section.l System Information¡ BIOS Version¡ Service Tag¡ Asset Tag¡ Ownership Tagl Memory Information¡ Memory Installed¡ Memory Available¡ Memory Speed¡ Memory Channel Mode