Option Description• SATA-0 enabled by default• eMMC enabled by defaultUSB Configuration This is an optional feature.This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot anytype of USB Mass Storage Devices—HDD, memory key, floppy.If USB port is enabled, device attached to this port is enabled and available for OS.If USB port is disabled, the OS cannot see any device attached to this port.The options are:• Enable Boot Support—enabled by default• Enable External USB Port—enabled by defaultNOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.USB PowerShare This field configures the USB PowerShare feature behavior. This option allows you to charge external devices usingthe stored system battery power through the USB PowerShare port. This option is disabled by defaultAudio This field enables or disables the integrated audio controller. By default, the Enable Audio option is selected. Theoptions are:• Enable Microphone—by default enable• Enable Internal Speaker—(default enable)Debug MemoryFrequencyConfigurationAllows you to enable or disable the following devices:• Memory Frequency 1866• Memory Frequency 1600 (default enable)MiscellaneousDevicesAllows you to enable or disable the following devices:• Secure Digital (SD) card—enabled• Secure Digital (SD) card read-only-modeVideo screen optionsOption DescriptionLCD Brightness Allows you to set the display brightness depending up on the power source—On Battery and On AC. The LCDbrightness is independent for battery and AC adapter. It can be set using the slider.NOTE: The video setting is visible only when a video card is installed into the system.Security screen optionsOption DescriptionAdmin Password Allows you to set, change, or delete the administrator (admin) password.NOTE: You must set the admin password before you set the system or hard drive password. Deletingthe admin password automatically deletes the system password and the hard drive password.38 System setup options