Dell Latitude 3190 2-in-1 Owner's Manual

Also see for Latitude 3190: Technical guidebook Access Guide Owner's manual Quick start guide

Contents

Dell Latitude 3190 2-in-1 Owner's Manual Manual pdf 23 page image

Installing the touchpad1 Place the touchpad into the slot on the system.2 Align and place touchpad bracket over the plastic hold down and replace the six M2x2 and one M2x3 screw to secure it to the system.3 Affix the adhesive tapes to secure the touchpad bracket4 Connect the touchpad cable to the connector and affix the adhesive—backed cable to secure it to the touchpad.5 Install the:a batteryb base cover6 Follow the procedure in After working inside your computer.Power connector portRemoving power connector port1 Follow the procedure in Before working inside your computer.2 Remove the:a base coverb battery3 To remove the power connector port:a Disconnect the power connector cable from the connector on the system board [1].b Remove the two M2x3 screws that secure the power connector port on the computer [2].c Slide and lift the power connector port from the computer [3].Disassembly and reassembly 23