Dell Latitude 3300 Setup And Specifications Manual

Also see for Vostro 3300: Setup and specifications guide Service manual Setup and features information Notice Service manual

Option DescriptionHyper-Thread Control Allows you to enable or disable the HyperThreading in theprocessor.• Disabled• Enabled—DefaultPower managementTable 30. Power ManagementOption DescriptionAC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter isconnected.• Wake on ACThis option is not set by default.Enable Intel Speed Shifttechnology This option is used to enable/disable Intel Speed Shift Technology.This option is not enabled by default.Auto On Time Allows you to set the time at which the computer must turn on automatically.The options are:• Disabled—Default• Every Day• Weekdays• Select DaysThis option is not set by default.USB Wake Support Allows you to enable USB devices to wake the system from standby.• Enable USB Wake Support• Wake on Dell USB-C Dock—DefaultWireless Radio Control This option if enabled, will sense the connection of the system to a wired network and subsequentlydisable the selected wireless radios (WLAN and/or WWAN). Upon disconnection from the wired networkthe selected wireless radio will be enabled.• Control WLAN radioThis option is not set by default.Wake on LAN /WLAN This option allows the computer to power up from the off state when triggered by a special LAN signal.Wake-up from the Standby state is unaffected by this setting and must be enabled in the operatingsystem. This feature only works when the computer is connected to AC power supply.• Disabled—Default - Does not allow the system to power on by special LAN signals when it receivesa wake-up signal from the LAN or wireless LAN.• LAN or WLAN - Allows the system to be powered on by special LAN or WLAN signals.• LAN Only - Allows the system to be powered on by special LAN signals.• WLAN Only - Allows the system to be powered on by special WLAN signals.• LAN with PXE Boot A wake up packet is sent to the system in either the S4 or S5Block Sleep This option lets you to block entering to sleep in OS environment.This option is not set by default.System setup 27