Dell Latitude 3300 User Manual

Also see for Vostro 3300: Setup and specifications guide Service manual Setup and features information Notice Service manual

Tasten BeschreibungFn + F10 Tastaturbeleuchtung umschaltenFn + F11 DruckFn + F12 EinfügenFn + Home Wireless ein/aus umschaltenFn + Ende EnergiesparmodusFn + Strg Anwendung öffnenFn + Esc Fn-Tastensperre umschaltenFn + Pfeil nach oben Helligkeit erhöhenFn + Pfeil nach unten Helligkeit reduzierenUEFI BIOSUEFI is an acronym for Unified Extensible Firmware Interface. The UEFI specification defines a new model for the interface betweenpersonal computer operating systems and platform firmware. The interface consists of data tables that contain platform relatedinformation, plus boot and runtime service calls that are available to the operating system and its loader. Together, these provide a standardenvironment for booting an operating system and running pre-boot applications. One of the main differences between BIOS and UEFI is theway applications are coded. Assembler was used if functions or applications had to be coded for the BIOS while a higher level languagecode will be used to program the UEFI.Dell UEFI BIOS implementation will supersede the existing two different sets of BIOS in the portables and desktop products into one singleUEFI BIOS moving forward.Important InformationThere is no difference in between the conventional BIOS and the UEFI BIOS unless the UEFI option is checked in the 'Boot List Option'setting in the BIOS page. This will allow the user to create a UEFI boot option list manually without affecting the existing boot priority list.With the implementation of UEFI BIOS, the changes are more related to the manufacturing tools and functionalities with very minimalimpact to the customer's usages.Few things to remember are:• If customers have a UEFI boot media and ONLY if they have UEFI boot media (either in the optical media or via USB storage), the one-time boot menu will show an additional section listing the UEFI boot options. If they don't have UEFI boot media attached, they willnever see this option. Almost all will never get to see this option unless the UEFI boot option is specified manually through the 'BootSequence' settings.• How to change Service Tag/Owner Tag?When the service technician replaces a system board, he's required to set the service tag upon the system starts up at one time offbasis. Failure to set a service tag may result system battery not being able to charge. Therefore, it is very important that the servicetechnician set the correct system service tag. If a wrong service tag is set, there's no way to reset it and the technician will have toplace order for another system board replacement.• How to change Asset tag information?To change the Asset tag information, we can use one of the following software utilities.24 Technologie und Komponenten