Option Description• 10 seconds (default)• 15 seconds• 30 seconds• 1 minute• 5 minutes• 15 minutes• NeverTouchscreen Controls whether the touchscreen is enabled or disabled. The touch screen option is enabled by default.Unobtrusive Mode When enabled, pressing Fn+F7 will turn off all light and sound emissions from the system.• Disabled — defaultMiscellaneousDevicesAllows you to enable or disable the following devices:• Enable Camera (default)• Enable Secure Digital (SD) Card (default)• Secure Digital (SD) Card Read-Only Mode• Enable Hard Drive Free Fall Protection (default)• Secure Digital (SD) Card BootVideo screen optionsOption DescriptionLCD Brightness Allows you to set the display brightness depending up on the power source—On Battery and On AC. The LCDbrightness is independent for battery and AC adapter. It can be set using the slider.Security screen optionsOption DescriptionAdmin Password Allows you to set, change, or delete the administrator (admin) password.NOTE: You must set the admin password before you set the system or hard drive password. Deleting theadmin password automatically deletes the system password and the hard drive password.NOTE: Successful password changes take effect immediately.Default setting: Not setSystem Password Allows you to set, change, or delete the system password.NOTE: Successful password changes take effect immediately.Default setting: Not setInternal HDD-0PasswordAllows you to set, change, or delete the administrator password.NOTE: Successful password changes take effect immediately.Default setting: Not set80 System setup options
