| 
Command Purposessh_forget_host Removes a host from the list of known ssh hosts. This commanddisplays a menu of known hosts and prompts for the host toforget.top Sets the chaps debug logging level. No arguments start verboseloggingTable 9. Advanced help commandCommand Purposebattery_test[] Tests the battery discharge rate for a given number of seconds. Noargument defaults to a 300 s test.bt_console [] Enters a Bluetooth debugging console. The Optional argumentspecifies the capability of a pairing agent the console provides; seethe Bluetooth Core specification for valid options.chaps_debug [start|stop|] Sets the chaps debug logging level. No arguments will startverbose logging.connectivity Shows connectivity status.experimental_storage Enables or disables experimental storage features.ff_debug [] [--help] [--list_valid_tags] [--reset] Adds and removes flimflam debugging tags.memory_test Performs extensive memory testing on the available free memory.modem [args...] Interacts with the 3G modem. Run modem help for detailed help.modem_set_carrier carrier-name Configures the modem for the specified carrier.network_diag[--date] [--link] [--show-macs] [--wifi] [--help] [--wifi-mon] Performs a suite of network diagnostics and saves a copy of theoutput to your download directorynetwork_logging Enables a predefined set of tags useful for debugging the specifieddevice.p2p_update [enable | disable] Enables or disables the peer-to-peer (P2P) sharing of updates overthe local network. This will both attempt to get updates from otherpeers in the network and shares the downloaded updates withthem. Run this command without arguments to see the currentstate.rlz < status | enable | disable> Enables or disables RLZ.rollback Attempts to roll back to the previous update cached on yoursystem. Only available on non-stable channels and non-enterpriseenrolled devices. Please note that this will power wash your device.route [-n] [-6] Displays the routing tables.set_apn [-n ] [-u ] [-p ]Sets the APN to use when connecting to the network specified by. If is not specified, use the network-idof the currently registered network.set_apn - c Clears the APN to be used, so that the default APN is used instead.set_arpgw Turns on the extra network state checking to make sure thedefault gateway is reachable.set_cellular_ppp [-u ] [-p ] Sets the PPP username and/or password for an existing cellularconnection. If neither -u nor -p is provided, this shows the existingPPP username for the cellular connection.set_cellular_ppp -c Clears any existing PPP username and PPP password for anexisting cellular connection.sound Low level sound configuration. Can be used to play/record audiosamples and enable beam forming on Pixel. sound beamforming will enable/disable the feature. sound record86 Troubleshooting |
