With today's ever increasing demands placed on data transfers with high-definition video content, terabyte storage devices, highmegapixel count digital cameras etc., USB 2.0 may not be fast enough. Furthermore, no USB 2.0 connection could ever come close to the480Mbps theoretical maximum throughput, making data transfer at around 320Mbps (40MB/s) — the actual real-world maximum.Similarly, USB 3.0/USB 3.1 Gen 1 connections will never achieve 4.8Gbps. We will likely see a real-world maximum rate of 400MB/s withoverheads. At this speed, USB 3.0/USB 3.1 Gen 1 is a 10x improvement over USB 2.0.ApplicationsUSB 3.0/USB 3.1 Gen 1 opens up the laneways and provides more headroom for devices to deliver a better overall experience. Where USBvideo was barely tolerable previously (both from a maximum resolution, latency, and video compression perspective), it's easy to imaginethat with 5-10 times the bandwidth available, USB video solutions should work that much better. Single-link DVI requires almost 2Gbpsthroughput. Where 480Mbps was limiting, 5Gbps is more than promising. With its promised 4.8Gbps speed, the standard will find its wayinto some products that previously weren't USB territory, like external RAID storage systems.Listed below are some of the available SuperSpeed USB 3.0/USB 3.1 Gen 1 products:• External Desktop USB 3.0/USB 3.1 Gen 1 Hard Drives• Portable USB 3.0/USB 3.1 Gen 1 Hard Drives• USB 3.0/USB 3.1 Gen 1 Drive Docks & Adapters• USB 3.0/USB 3.1 Gen 1 Flash Drives & Readers• USB 3.0/USB 3.1 Gen 1 Solid-state Drives• USB 3.0/USB 3.1 Gen 1 RAIDs• Optical Media Drives• Multimedia Devices• Networking• USB 3.0/USB 3.1 Gen 1 Adapter Cards & HubsCompatibilityThe good news is that USB 3.0/USB 3.1 Gen 1 has been carefully planned from the start to peacefully co-exist with USB 2.0. First of all,while USB 3.0/USB 3.1 Gen 1 specifies new physical connections and thus new cables to take advantage of the higher speed capability ofthe new protocol, the connector itself remains the same rectangular shape with the four USB 2.0 contacts in the exact same location asbefore. Five new connections to carry receive and transmitted data independently are present on USB 3.0/USB 3.1 Gen 1 cables and onlycome into contact when connected to a proper SuperSpeed USB connection.Windows 10 will be bringing native support for USB 3.1 Gen 1 controllers. This is in contrast to previous versions of Windows, whichcontinue to require separate drivers for USB 3.0/USB 3.1 Gen 1 controllers.Power button LED behaviorOn certain Dell Latitude systems, the power button LED is used to provide an indication of the system status, and as a result the powerbutton illuminates when pressed. The systems with the optional power button/fingerprint reader will have no LED under the power buttonand hence will apply the available LED's in the system to provide an indication of the system status.Power button LED behavior without Fingerprint reader• System is ON (S0) = LED illuminates solid white.16 Technology and components