Option DescriptionDefault setting: DisabledBlock Sleep This option lets you block entering to sleep (S3 state) in operating system environment.Block Sleep (S3 state)Default setting: This option is disabledPeak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After youenable this option, your system runs only in battery even if the AC is attached.Advanced BatteryChargeConfigurationThis option enables you to maximize the battery health. By enabling this option, your system uses the standardcharging algorithm and other techniques, during the non-work hours to improve the battery health.DisabledDefault setting: DisabledPrimary BatteryChargeConfigurationAllows you to select the charging mode for the battery. The options are:• Adaptive• Standard — Fully charges your battery at a standard rate.• ExpressCharge — The battery charges over a shorter period of time using Dell’s fast charging technology. Thisoption is enabled by default.• Primarily AC use• CustomIf Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.NOTE: All charging mode may not be available for all the batteries. To enable this option, disable theAdvanced Battery Charge Configuration option.Sleep Mode This option is used to select which sleep mode will be used by operating system.• OS Automatic Selection• Force S3: This option is enabled by default.Type-C ConnectorPowerThis option lets you set the maximum power that can be drawn from the Type-C connector.• 7.5 Watts: This option is enabled by default.• 15 WattsGUID-C66A3D67-9F3D-492D-B13C-05E997A54E79POST Behavior screen optionsOption DescriptionAdapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.Default setting: Enable Adapter WarningsKeypad(Embedded)Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.• Fn Key Only: This option is enabled by default.• By NumlockSystem setup options 87
