Dell Latitude 5491 Setup And Specifications Manual

Also see for Inspiron 5491: Service manual Service manual Setup and specifications Setup and specifications guide Installation guide

Dell Latitude 5491 Setup And Specifications Manual Manual pdf 24 page image

Option DescriptionSMART Reporting This field controls whether hard drive errors for integrated drives are reported during system startup. Thistechnology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This option isdisabled by default.• Enable SMART ReportingUSB Configuration This is an optional feature.This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot anytype of USB Mass Storage Devices (HDD, memory key, floppy).If USB port is enabled, device attached to this port is enabled and available for OS.If USB port is disabled, the OS cannot see any device attached to this port.The options are:• Enable USB Boot Support: This option is enabled by default.• Enable External USB Port: This option is enabled by default.NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.Dell Type-C DockConfigurationThe option Always Allow Dell Docks is enabled by default.USB PowerShare This field configures the USB PowerShare feature behavior. This option allows you to charge external devices usingthe stored system battery power through the USB PowerShare port. The option "Enable USB Power Share" is notenabled by default.Audio • Enable Microphone (default)• Enable Internal Speaker (default)Unobtrusive Mode This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To resume normaloperation, press Fn+F7 again. This option is disabled by default.MiscellaneousDevicesAllows you to enable or disable the following devices:• Enable Camera: This option is enabled by default.• Enable Hard Drive Free Fall Protection: This option is enabled by default.• Enable Secure Digital (SD) Card: This option is enabled by default.• Secure Digital (SD) Card Boot• Secure Digital (SD) Card Read — only ModeVideo screen optionsOption DescriptionLCD Brightness Allows you to set the display brightness depending up on the power source (On Battery and On AC).NOTE: The video setting will be visible only when a video card is installed into the system.24 System setup options