Option DescriptionBoot list options • Legacy• UEFI—selected by defaultAdvanced BootOptionsThis option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled.Enable Attempt Legacy Boot is disabled by default.UEFI boot pathsecurity • Always, except internal HDD• Always• NeverDate/Time Allows you to change the date and time.System Configuration screen optionsOption DescriptionIntegrated NIC Allows you to configure the integrated network controller. The options are:• Disabled• Enabled• Enable UEFI network stack: This option is enabled by default.• Enabled w/PXEParallel Port Allows you to configure the parallel port on the docking station. The options are:• Disabled• AT: This option is enabled by default.• PS2• ECPSerial Port Allows you to configure the integrated serial port. The options are:• Disabled• COM1: This option is enabled by default.• COM2• COM3• COM4SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:• Disabled• AHCI• RAID On: This option is enabled by default.Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:• SATA-0• M.2 PCI-e SSD-0• SATA-2System Setup 51