Dell Latitude 9440 2-in-1 Service Manual

Also see for Latitude 9440 2-in-1: Setup and specifications

Table 6. System setup options—Storage menuStorageSATA/NVMe OperationSATA/NVMe Operation Set the operating mode of the integrated storage device controller. By default,the RAID On option is enabled.Storage InterfacePort Enablement By default, the M.2 PCIe SSD-0 option is enabled.SMART ReportingEnable SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology(SMART) during computer startup.By default, the Enable SMART Reporting option is not enabled.Drive InformationTable 7. System setup options—Display menuDisplayDisplay BrightnessBrightness on battery power Enable to set screen brightness when the computer is running on batterypower.Brightness on AC power Enable to set screen brightness when the computer is running on AC power.Touchscreen By default, the option is enabled.Full Screen Logo Enable or disable full screen logo.By default, the option is not enabled.Table 8. System setup options—Connection menuConnectionWireless Device EnableWWAN/GPS Enable or disable the internal WWAN/GPS deviceBy default, the option enabled.WLAN Enable or disable the internal WLAN deviceBy default, the option enabled.Bluetooth Enable or disable the internal Bluetooth deviceBy default, the option enabled.Enable UEFI Network Stack Enable or disable UEFI Network Stack and controls the on-board LANController.By default, the Enable UEFI Network Stack option are enabled.Wireless Radio ControlControl WLAN radio Sense the connection of the computer to a wired network and subsequentlydisable the selected wireless radios (WLAN).By default, the option is disabled.Control WWAN radio Sense the connection of the computer to a wired network and subsequentlydisable the selected wireless radios (WWAN).By default, the option is disabled.Dynamic Wireless Transmit Power By default, the option is enabled.BIOS setup 61