Dell Latitude 9510 Service Manual

Also see for Latitude 9510: Setup and specifications guide Service manual

Steps1. Align and place the I/O board on the system.2. Replace the four (M1.6x3.5) screws to secure the I/O board in place.3. Connect the LED board cable, fingerprint reader cable, and I/O daughter board data cable to the connectors on the I/O board.NOTE: Reconnect the battery cable after laptop repair is completed.Next steps1. Install the System Fan.2. Install the Base cover.3. Install the SIM card tray.4. Install the microSD card.5. Follow the procedure in After working on your computer.Power buttonRemoving the power buttonPrerequisites1. Follow the procedure in before working inside your computer.2. Enter service mode.3. Remove the microSD card.4. Remove the SIM card tray.5. Remove the Base cover.6. Remove the Fan.7. Remove the I/O board .About this taskThe following images indicate the location of the power-button and provide a visual representation of the removal procedure.32 Removing and Installing Components