Dell Latitude CPt V Service Manual

Contents

26 Dell Latitude CPt V-Series/CPx H-Series Service Manual6. Disconnect the two-wire back-light plug from the connector on the inverter.7. Lift the LCD panel and carefully disconnect the flex cable from theconnector on the left edge of the LCD panel.8. Remove the LCD panel from the top cover. 1. Disconnect the LCD flex cable from the ZIF connector on the inverter.2. Remove the three 3-mm screws securing the inverter to the top cover.3. Remove the inverter from the top cover. 1. Remove the 4-mm screw securing the metal cable clip to the left hinge ofthe display-assembly top cover (see Figure 15).2. Remove the cable out from under the plastic strain relief retainer locatedon the bottom of the display-assembly hinge cover.3. Remove the flex-cable clip from the bottom of the hinge cover located atthe bottom of the display assembly.4. Pry the hinge-cover assembly apart from the display assembly, allowingjust enough space for the flex cable to pass through the opening.5. Slide the cable through the opening. 1. Pry the hinge-cover assembly apart from the display assembly, allowingjust enough space for the flex cable to pass through the opening.2. Slide the cable through the opening.3. Attach the flex-cable clip to the bottom of the hinge cover located at thebottom of the display assembly.4. Slide the flex cable under the plastic strain relief retainer located on thebottom of the display-assembly hinge cover.5. Reinstall the 4-mm screw that secures the metal cable clip to the left hingeof the display-assembly top cover.6. Find the manufacturer’s name on the back of the LCD panel that is to beinstalled.The manufacturer is either Torisan or Sharp.=26 =2