Dell Latitude D531 Service Manual

Also see for Latitude D531: Quick reference guide User guide Quick reference guide User guide Quick reference guide

6. Remove the Mini-Card from the connector at a 45-degree angle.Replacing the Mini-Card1. Align the Mini-Card edge connector with the system board connector, then slide the card firmly into the connector at a 45-degree angle.2. Rotate the Mini-Card down until it clicks into place. If you do not feel the click, remove the card and reinstall it.3. Connect the cables to the Mini-Card, ensuring that you route the cables correctly.4. Replace the keyboard (see Replacing the Keyboard).5. Replace the hinge cover (see Replacing the Hinge Cover).Back to Contents Page1 Mini-Card 2 metal retention bracketCAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, suchas the back panel on the computer.NOTICE: The card connector is keyed to ensure correct insertion. If you feel resistance, realign the card.NOTICE: To avoid damaging the Mini-Card, never place cables on top of or under the card.NOTICE: Do not insert a Mobile Broadband (WWAN) network card into the WLAN card connector.NOTE: The Mini-Card may have two or three antenna connectors, depending on the type of card you ordered.NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mini-Card.