Dell Latitude D600 Service Manual

Also see for Lattitude D600: Installing and configuring System information guide Service manual Service manual User guide

Contents

5. Lift out the microprocessor module.Installing the Microprocessor Module1. Align the pin-1 corner of the microprocessor module with the pin-1 corner of the ZIF socket, and insert the microprocessor module.When the microprocessor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higherthan the others, the module is not seated correctly.2. Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module to the system board.3. Replace the other computer parts you removed earlier in this procedure.4. Update the BIOS using a flash BIOS update program floppy disk or CD. For instructions on how to flash the BIOS, see "Flashing the BIOS."Back to Contents PageNOTE: See Mini RSL for microprocessor part numbers.NOTICE: Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly inthe ZIF socket does not require force.NOTICE: A microprocessor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor andZIF socket.NOTE: The pin-1 corner of the microprocessor module has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.NOTICE: You must position the microprocessor module correctly in the ZIF socket to avoid permanent damage to the module and the socket.